(1)清洗物體的材料性能。如超聲波清洗機清洗物體是金屬材料，則應考慮到鋼鐵、不銹鋼、鋁材、鑰材制成的物體在強度、耐化學腐蝕性能上都有很大判別.由木材、皮革、玻瑞、塑料、橡膠等非金屬材料制成的物體在性能上也有很大差別。因此在清洗中要充分了解這些材料的性能，有針對性地選用合適的清洗劑與清洗方法。

(1) Material properties of cleaning objects. If the object to be cleaned by the ultrasonic cleaning machine is a metal material, it should be considered that the objects made of steel, stainless steel, aluminum and key materials have great discrimination in strength and chemical corrosion resistance Objects made of non-metallic materials such as wood, leather, Borui, plastic and rubber also have great differences in performance. Therefore, it is necessary to fully understand the properties of these materials and select appropriate cleaning agents and methods.

(2)清洗物體的表面狀況。光滑平整的物體表面與粗糙不均勻的物體表面用同樣的方法清洗，取得的效果是大不相同的。在選擇清洗方法時要充分考慮物體的表面狀況。

(2) Clean the surface condition of the object. The smooth and flat object surface and the rough and uneven object surface are cleaned by the same method, and the results are very different. The surface condition of the object shall be fully considered when selecting the cleaning method.

(3)污垢的情況。對于不同的污垢要采用不同的清洗劑，對于金屬表面以油脂為主的污垢與以水垢、氧化物為主的污垢所選用的清洗劑及清洗方法是大不相同的。

(3) Dirt condition. Different cleaning agents should be used for different dirt. The cleaning agents and methods used for dirt on the metal surface mainly composed of grease and dirt mainly composed of scale and oxide are very different.

(4)要求洗凈的程度。對于普通金屬零件和高精密電子元件，由于對表面加工精度要求不同，洗凈去污的要求不同，因此選用的方法也不同。隨著洗凈度要求提高，生產成本也迅速提高。因此必須兼顧清潔度要求與經濟性兩方面要求，選擇合適的清洗劑與方法。

(4) The degree of cleaning required. For common metal parts and high-precision electronic components, due to different requirements for surface machining accuracy and cleaning and decontamination, the methods selected are also different. With the improvement of cleanliness requirements, the production cost has also increased rapidly. Therefore, the requirements of cleanliness and economy must be taken into account, and appropriate cleaning agents and methods must be selected.

(5)使用的清洗設備。使用的超聲波清洗機清洗設備可以取得較好的清洗效果，但也要考慮到實際需要的必要性。

(5) Cleaning equipment used. The use of advanced ultrasonic cleaning equipment can achieve better cleaning results, but it is also necessary to consider the actual needs.

(6)使用的洗滌劑性。在選擇洗滌劑時要充分了解洗滌劑的性能。如是否易燃易爆，對皮膚刺激性如何，對人有性以及廢水如何處理等，以免在清洗過程中造成不必要的意外事故。

(6) Safety of detergent used. When choosing detergent, we should fully understand the performance of detergent. Such as whether it is flammable and explosive, how irritating it is to the skin, how non-toxic it is to people, and how to treat the waste water, so as to avoid unnecessary accidents during the cleaning process.

(7)清洗的效率。提高山東超聲波清洗機清洗去污的效率是十分重要的，如用單純浸泡的方法去除金屬表面的污物耗時較多，而采用循環流動伴有攪拌、超聲波處理或蒸氣清洗時去污時間就可大大縮短。對于大批工業零件的清洗，采用流水線可以大幅度提高生產效率。因此要根據實際需要選擇不同的清洗方法。

(7) Cleaning efficiency. It is very important to improve the cleaning and decontamination efficiency of Shandong ultrasonic cleaning machine. For example, it takes more time to remove the dirt on the metal surface by simply soaking, and the decontamination time can be greatly shortened by using circulating flow with stirring, ultrasonic treatment or steam cleaning. For the cleaning of a large number of industrial parts, the use of assembly lines can greatly improve the production efficiency. Therefore, different cleaning methods should be selected according to actual needs.

此外在選擇清洗方法時，必須考慮生產成本。在保證清潔度的前提下，使用便宜的方法，即是合理的選擇。以上便是關于清洗機選擇清洗方法時要考慮到幾種情況的相關內容，您可以來我們網站www.zjfsmy.com關注咨詢！

In addition, the production cost must be considered when selecting the cleaning method. On the premise of ensuring the cleanliness, using cheap methods is a reasonable choice. The above is about several situations that should be considered when selecting cleaning methods for the cleaning machine. You can visit our website at www.jnthcsb Com follow the consultation!