在采購超聲波清洗機的時候，是了解自己的產品可以用哪些方式去洗，第二是要達到一種什么樣的清潔效果，第三是預計自己公司發展的產量會達到多少，要購買的機器產能是要多少，第四步是清洗工藝的了解，詢問自己同行的是采用什么樣的工藝，或者咨詢超聲波的生產廠家有沒有更新的清洗工藝，第五是選擇一些的生產企業進行清洗工藝、和售后服務保障方面比較，第六是在簽訂合同時把做設備所用材料型號，易耗品，維修條款等等寫進合同協議中，以防一些不良生產企業的欺詐，第七是驗收，如果是大型設備的話，您盡量要帶上您的工件到生產企業去現場驗收，第八是安裝完對您公司員工的培訓，您確定您的員工是真的學會了而不是安裝人員所說已經培訓過了。一、功率的選擇

　　When purchasing an ultrasonic cleaning machine, the first step is to understand how your product can be cleaned, the second is to achieve what kind of cleaning effect, the third is to estimate your company's production capacity and the maximum production capacity of the machine you want to purchase, the fourth step is to understand the cleaning process, ask your peers what kind of process they are using, or consult with ultrasonic manufacturers for updated cleaning processes, the fifth is to compare the cleaning process, price, and after-sales service guarantee of some professional production enterprises, and the sixth is to include the brand and model of materials used in the equipment, consumable prices, maintenance terms, etc. in the contract agreement when signing the contract, in order to prevent some bad production enterprises from being affected. Fraud, the seventh is acceptance. If it is a large equipment, You should try to bring your workpiece to the production enterprise for on-site inspection. The eighth step is to provide training to your company's employees after installation. Are you sure that your employees have truly learned it, rather than the installation personnel claiming that they have already been trained. 1、 Power selection

　　超聲波清洗機有時用小功率，花費很長時間也沒有污垢。而如果功率達到一定數值，很快便將污垢去除。若選擇功率太大，空化強度將大大增加，清洗效果是提高了，但這時較精密的零件也產生了蝕點，而且清洗機底部振動板空化嚴重，水點腐蝕也增大，在采用三氯乙烯等有機溶劑時，基本上沒有問題，但采用水或水溶性清洗液時，易于受到水點腐蝕，如果振動板表面已受到傷痕，強功率下水底產生空化腐蝕更嚴重，因此要按實際使用情況選擇超聲功率。二、頻率的選擇

　　Ultrasonic cleaning machines sometimes use low power and take a long time without removing dirt. If the power reaches a certain value, the dirt will be quickly removed. If the power is chosen to be too high, the cavitation intensity will be greatly increased, and the cleaning effect will be improved. However, at this time, more precise parts will also produce corrosion points, and the vibration plate at the bottom of the cleaning machine will have severe cavitation, and water point corrosion will also increase. When using organic solvents such as trichloroethylene, there is basically no problem, but when using water or water-soluble cleaning solutions, it is easy to suffer from water point corrosion. If the surface of the vibration plate has been damaged, cavitation corrosion will be more severe under high power, so the ultrasonic power should be selected according to the actual use situation. 2、 Frequency selection

　　超聲清洗頻率從28 kHz 到 120kHz 之間，在使用水或水清洗劑時由空穴作用引起的物理清洗力顯然對低頻有利，一般使用 28-40kHz 左右。對小間隙、狹縫、深孔的零件清洗，用高頻(一般 40kHz 以上)較好，甚幾百 kHz 。對鐘表零件清洗時，用 100kHz 。若用寬帶調頻清洗，效果更良好。三、清洗籃的使用

　　The ultrasonic cleaning frequency ranges from 28 kHz to 120 kHz, and the physical cleaning force caused by the action of holes when using water or water cleaning agents is clearly advantageous for low frequencies. Generally, around 28-40 kHz is used. For cleaning parts with small gaps, narrow slits, and deep holes, it is better to use high frequency (usually above 40kHz), even several hundred kHz. When cleaning clock parts, use 100kHz. If broadband FM cleaning is used, the effect will be better. 3、 Use of cleaning basket

　　在清洗小零件物品時，常使用網籃，由于網眼要引起超聲衰減，要特別引起注意。當頻率為 28khz 時使用 10mm 以上的網眼為好。

　　When cleaning small items, a mesh basket is often used, and special attention should be paid to the ultrasonic attenuation caused by the mesh. It is better to use a mesh size of 10mm or more when the frequency is 28kHz.

　　本文由 超聲波清洗機  友情奉獻.更多有關的知識請點擊http://www.zjfsmy.com 真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from the ultrasonic cleaning machine. For more related knowledge, please click http://www.zjfsmy.com Sincere attitude. We provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Please stay tuned