有一些客戶本以為只要購買了碳?xì)淝逑礄C(jī)進行碳?xì)淝逑葱Ч麜?huì)更好，但清洗效果卻不理想。這到底是什么原因造成的呢？下面小編就來和大家一起探討這個問題。

Some customers thought that it would be better if they bought hydrocarbon cleaning equipment for hydrocarbon cleaning, but the cleaning effect was not ideal. What is the cause of this? Next, Xiaobian will discuss this issue with you.

1、蒸餾釜不沸騰

1. Still does not boil

蒸餾釜一般有兩大功能，一是提供蒸汽到干燥槽，實現對產品氣相清洗及升溫；二是通過蒸汽冷凝回收，實現碳?xì)淙軇┑脑偕貜?fù)利用，減排。如果蒸餾釜蒸餾不沸騰，相當于蒸餾回收系統癱瘓，氣相清洗失效，溶劑也無法再生。隨著清洗量的加大，清洗槽內的碳?xì)渲鸩轿廴?，就?huì)出現產品清洗不干凈的現象。

The distillation kettle generally has two major functions: one is to provide steam to the drying tank to achieve gas-phase cleaning and temperature rise of the product; Second, through steam condensation recovery, the hydrocarbon solvent can be recycled and reused to save energy and reduce emissions. If the distillation kettle does not boil, it is equivalent to the paralysis of the distillation recovery system, the failure of gas-phase cleaning, and the failure of solvent regeneration. With the increase of cleaning volume, the hydrocarbon in the cleaning tank will be gradually polluted, and the product will not be cleaned.

2、蒸汽清洗及干燥的時間

2. Steam cleaning and drying time

蒸汽清洗時間越長越有利于提高產品的潔凈度；蒸汽時間太短，產品的直接加溫不夠，會影響產品的干燥效果。所以，蒸汽清洗時間對產品清洗效果來說是很關鍵的。另外，干燥時間越長越有利于干燥。而干燥效率的快慢取決于設備抽的能力和產品表面的溫度。一般來說，碳?xì)淝逑丛O(shè)備干燥時間都在120-280秒之間，根據產品的形狀及設備的能力而設定，如杜爾設備，60秒即可完成對普通立體狀產品的清洗干燥。

The longer the steam cleaning time, the better the cleanliness of the product; The steam time is too short, and the direct heating of the product is not enough, which will affect the drying effect of the product. Therefore, the steam cleaning time is critical to the product cleaning effect. In addition, the longer the drying time, the better the drying. The drying efficiency depends on the pumping capacity of the equipment and the temperature of the product surface. Generally speaking, the drying time of hydrocarbon cleaning equipment is between 120-280 seconds, which is set according to the shape of the product and the capacity of the equipment. For example, dur equipment can complete the cleaning and drying of ordinary three-dimensional products in 60 seconds.

3、清洗系統的時間、溫度和度

3. Time, temperature and degree of cleaning system

清洗時間越長越有利于油污的溶解與分離，因此清洗時間的設定要考慮產品的油污輕重及生產效率。溫度越高，碳?xì)淙軇┑姆肿舆\(yùn)動速度更快，其對油污溶解能力，對產品的滲透力更強。由于碳?xì)淙軇橐兹家后w，溫度的設定需要考慮使用的性。若使用的碳?xì)淙軇╅W點較高，可在可控范圍內適當提高清洗溫度，提高清洗品質。

The longer the cleaning time is, the better the dissolution and separation of oil stains will be. Therefore, the setting of cleaning time should consider the degree of oil stains and production efficiency. The higher the temperature, the faster the molecular movement of the hydrocarbon solvent, its solubility in oil and its penetration into products will be stronger. Since hydrocarbon solvents are flammable liquids, the safety of use should be considered in setting the temperature. If the hydrocarbon solvent used has a high flash point, the cleaning temperature can be appropriately increased within a controllable range to improve the cleaning quality.

溫度的調整與設備的抽能力有關。一般配合超聲波使用，度越大，密閉的清洗空間內，泵抽氣能力越強，殘留空氣越少，會讓超聲波衰減變?nèi)?，從而促進超聲波能量傳遞，增大超聲的強度。

The temperature adjustment is related to the pumping capacity of the equipment. Generally, it is used with ultrasound. The greater the degree, the stronger the pumping capacity and the less the residual air in the closed cleaning space, which will weaken the attenuation of ultrasound, thus promoting the transmission of ultrasound energy and increasing the intensity of ultrasound.

隨著工業清洗的迅速發展，制造業對精密零部件的使用壽命、振動及噪聲的要求越來越高，傳統的清洗技術很難滿足精密工件的清洗質量要求。使用碳?xì)淝逑礄C(jī)是現階段工業清洗行業的主流，即碳?xì)淝逑礄C(jī)和配套的清洗劑尤其重要。您有相關需求或者什么問題就來我們網站www.zjfsmy.com咨詢了解吧！

With the rapid development of industrial cleaning, the manufacturing industry has higher and higher requirements for the service life, vibration and noise of precision parts. Traditional cleaning technology can hardly meet the cleaning quality requirements of precision parts. The use of hydrocarbon cleaning machines is the mainstream of the industrial cleaning industry at this stage, that is, environmentally friendly hydrocarbon cleaning machines and supporting cleaning agents are particularly important. If you have any relevant needs or questions, please come to our website www.zjfsmy.com for consultation!