現在市場上超聲波清洗機的和種類數不勝數，也參差不齊。導致大家在選購機器時不知道購買哪一種的比較好。下面單工位旋轉噴淋清洗機生產廠家就教大家三個技巧，挑選的超聲波清洗機。

There are numerous brands and types of ultrasonic cleaning machines on the market, and the prices are also uneven. As a result, we don't know which kind of machine is better when we buy it. The manufacturer of single-station rotary spray cleaning machine will teach you three skills to select excellent ultrasonic cleaning machine.

1、看超聲頻率

1. Look at the ultrasonic frequency

市面上的超聲波清洗機，大多數頻率在40~50kHz左右，這個頻率階段是非常中庸的頻段，符合絕大多數場景的使用。但是正式因為這個頻段使用非常多，導致振子(即換能器)的質量不一。而擁有高頻(100kHz左右)或者低頻(25kHz)頻段的超聲波清洗機，其振子質量相對較好，尤其某些雙頻的機器，其振子一定優(yōu)于單頻的機器。所以在選購時，條件允許的話，可以優(yōu)先選擇雙頻的機器，然后根據被清洗物選擇高頻還是低頻。

Most of the ultrasonic cleaning machines on the market have a frequency of about 40~50kHz. This frequency stage is a very moderate frequency band, which is suitable for most scenarios. However, because this frequency band is widely used, the quality of the vibrator (i.e., the transducer) is different. The vibrator quality of ultrasonic cleaning machine with high frequency (about 100kHz) or low frequency (25kHz) frequency band is relatively good, especially for some dual-frequency machines, the vibrator must be better than single-frequency machines. Therefore, if conditions permit, dual-frequency machines can be selected first, and then high-frequency or low-frequency machines can be selected according to the object to be cleaned.

2、看功率

2. See power

功率越高，清洗效果越好，這是毋庸置疑的。但是過高的功率會對被清洗物有所腐蝕，所以功率太大了也不好。那么應該怎么選擇呢?其實部分廠家也考慮到了這一點，所有，有的清洗機設備是可以自行調整超聲功率的，1%~99%可調。帶有功率可調功能的設備，條件允許的話盡量往大功率的買。

There is no doubt that the higher the power, the better the cleaning effect. However, too high power will corrode the cleaned object, so too high power is not good. So how should we choose? In fact, some manufacturers have also taken this into account. All of them can adjust the ultrasonic power by themselves, with 1%~99% adjustable. For equipment with adjustable power, try to buy high-power equipment if conditions permit.

3、聽聲音

3. Listen to sound

聽聲音，是指聽設備工作時的聲音。理論上來說，超聲波是人耳聽不到的聲音，但是在實際中，超聲波清洗機是會發(fā)出一定的噪音的，這是由于各種原因造成的。當兩款設備，材質基本相同，功率和頻率也相同時，哪一個的噪音小，說明質量比較好。原因是：

Listening refers to the sound of the equipment when it is working. In theory, ultrasound is a sound that cannot be heard by human ears, but in practice, ultrasonic cleaning machines will make certain noise, which is caused by various reasons. When the two types of equipment are basically the same in material, power and frequency, which one has less noise indicates better quality. as a result of:

a)振子工作時不是100%處于超聲頻段的，好的振子處在超聲頻段的時間較多，噪音就小。

a) When the vibrator works, it is not 100% in the ultrasonic frequency band. A good vibrator spends more time in the ultrasonic frequency band, and the noise is small.

b)噪音小，說明材料之間的密封性好，也就是制造工藝要求比較高，這樣的設備更加耐用。

b) Low noise means that the sealing between materials is good, that is, the manufacturing process requirements are relatively high, and such equipment is more durable.

c)說明廠家是真實的為客戶著想，這樣的廠家在產品和服務上會更好。

c) It shows that the manufacturer is truly considerate of customers, and such manufacturers will be better at products and services.

以上就是給大家簡介的選擇超聲波清洗機主要看中的幾點，需要了解更多的詳情可來我們網站進行咨詢或者直接撥打電話聯系我們http://www.zjfsmy.com！

The above are the main points of choosing ultrasonic cleaning machine. For more details, please visit our website or call us directly http://www.zjfsmy.com ！