噴淋清洗機作為一款機械設備，除了其能實現清洗目的外，對其自身的檢查也是必不可少的，那如何檢查呢？小編為您解說一番。

As a mechanical equipment, the spray washer can not only achieve the purpose of cleaning, but also is indispensable for its own inspection. How to inspect it? I'll explain it to you.

1、噴淋清洗機底部排水篩無雜物：噴淋清洗機底部的排水篩會留滯來自器械組的污染物。應少每天取下篩網并清洗，或根據使用次數增加清洗頻率。阻塞的篩網會阻礙水流和排水，從而影響清洗機的清洗效力。

1. The drain screen at the bottom of the spray washer is free of impurities: the drain screen at the bottom of the spray washer will retain pollutants from the instrument set. The screen should be removed and cleaned at least daily, or more frequently depending on the number of uses. Blocked screen will block water flow and drainage, thus affecting the cleaning effectiveness of the washer.

2、清洗劑/化學品輸送管道清晰、功能正常：目視檢查所有清洗劑等化學品輸送管道和連接端口：確保它們清晰，清潔，無阻塞、滯留空氣、扭結。管道上的磨損痕跡、破損或泄漏也應注意檢查。如果輸送管道有問題，則清洗液的濃度可能不正確從而使清洗循環無效。

2. Cleaning agent/chemical delivery pipeline is clear and functional: visually inspect all cleaning agent and other chemical delivery pipelines and connection ports: ensure that they are clear, clean and free of blockage, trapped air and kinks. Attention shall also be paid to the inspection of wear marks, damages or leaks on the pipeline. If there is a problem with the delivery pipe, the concentration of the cleaning solution may be incorrect, which will invalidate the cleaning cycle.

3、檢查噴淋清洗機所有化學品、清洗劑濃度是否正確：確保清洗劑及其他化學品容器內的余量充足，確保輸送分配管道正確連接到對應的容器。

3. Check whether the concentration of all chemicals and cleaning agents in the spray washer is correct: ensure that the residual amount in the containers of cleaning agents and other chemicals is sufficient, and ensure that the delivery and distribution pipes are correctly connected to the corresponding containers.

4、觀察噴淋清洗機總體情況：艙體內表面應清潔，無污點、水垢及其它污染物堆積。這些都可能影響清洗機的性能和清洗效果。污點和水垢可能表明有水質、化學品濃度過高等問題。確保任何適用的墊圈、密封圈、記錄器都處于正常狀態。

4. Observe the overall condition of the spray washer: the interior surface of the cabin shall be clean and free of stains, scale and other pollutants. These may affect the performance and cleaning effect of the cleaning machine. Stains and scale may indicate problems such as high water quality and chemical concentration. Ensure that any applicable gaskets, sealing rings and recorders are in normal condition.

5、檢查噴淋清洗機艙體內照明燈具工作正常：清洗機擁有視窗和內部照明燈具允許在循環過程中觀察清洗機的性能。循環過程中需觀察噴淋臂是否正常運行，無器械/托盤阻礙清洗機的性能。觀察水流，確保無泡沫過多等跡象。

5. Check that the lighting lamps in the spray cleaning engine room work normally: the cleaning machine has windows and internal lighting lamps, allowing the performance of the cleaning machine to be observed during the cycle. During the circulation, it is necessary to observe whether the spray arm operates normally, and no instrument/tray hinders the performance of the washer. Observe the water flow to ensure that there is no sign of excessive foam.

只有做好這些檢查，才能更好的使用該設備，也才能讓噴淋清洗機更好的為我們工作，更好的達到我們想要的清洗效果。更多相關內容就來我們網站www.zjfsmy.com咨詢吧！

Only by doing a good job in these inspections can we better use the equipment and make the spray washer work better for us, so as to better achieve the cleaning effect we want. For more information, please visit our website www.zjfsmy.com!